Coppo is a made-to-measure tile shaped metal sheet that enables the realization of new roofs and the restoration of old ones. It can be made with various materials and also includes a wide range of accessories that have been designed specifically to adapt to the geometry of the profile.Read more
IsoCoppo Tek is the new “reinforced” tile shaped pressed sheet: a core of high density polyurethane foam is applied during the manufacturing process which increases the product’s intrinsic properties. Its main characteristics are: lightness, a wide range of accessories and standard lengths with overlapping and polyurethane already removed.Read more
IsoCoppo Piano was the first tile shaped insulated panel introduced to the market: its shape was conceived right from the start to look as much as possible like a traditional Roman tile. This resulted in the creation of the tile shaped pressed panel with an average insulating material the thickness of which is the highest in the market.Read more
Coppo Roma is the new system of Roman tile-shaped sheets that brings together the technology of metal and the tradition of clay roofs. Coppo Roma is not just a simple metal sheet but an integrated system to cover the roof, completed by a range of accessories and special items aimed at satisfying all project requirements.Read more
Is the tile shaped sheet produced to measure that enables the realization of new roofings and the restoration of old ones. It is produced in various materials and it includes also a wide range of accessories that have been developed specifically to adapt to the geometry of the profile.
Il Coppo is a metal sheet shaped like a tile and used to make roofs that are exactly like those of the typically Italian architecture. Its crowning glory is, first and foremost, an incredible lightness, equal to a tenth of the equivalent clay solution. Its considerable long life is also an added plus guaranteed by the choice of metal.
Fixing on wood structure
Fixing on metallic frame
Il Coppo di Alubel can be installed even on metallic frame than in wood structures; distance between span must be each 350 mm.
The installation of Coppo/IsoCoppo range is characterised by an extreme simplicity and quickness: the possibility to assemble sheets to measure means assembling many square metres in less time.
It is the first tile shaped insulated panel introduced to the market: its shape was conceived right from the start to look as much as possible like traditional tiles.
Each single roof now has to guarantee specific energy requirements which were unheard of only a few years ago: with this in mind Alubel designed Isocoppo Piano, the pressed, insulated, flat structural panel shaped like a tile. It is a classical sandwich panel with a double metal sheet and a polyurethane foam layer in between (density 35-40kg/m3) and has a far superior finish looking just like a traditional tile roof. In this way, Isocoppo Piano is suited to all applications, especially where greater sensitivity is required as regards to the surrounding landscape, whether it is town buildings (old town centres or in contexts of great worth) or a typically rural setting (farm houses, livestock sheds).
From the point of view of heat insulation, the standard 40 mm version panels guarantee a transmission rate of U=0.377 W/mqK, but they are also available 100 mm thick with a transmission rate of U=0.189 W/m2K (value adequate to meet the strictest energy efficiency standards). The strong point of this solution is its load bearing capacity which, in the steel version with the standard 40 mm thickness can reach an allowable load greater than 300 kg/m2 for a span of 1.5 m meaning that it can be laid on sub-structures with larger spans. This does of course mean it is much quicker to lay making this solution ideal everywhere.
|IsoCoppo 40 mm
steel 0,5 mm + steel 0,4 mm
|IsoCoppo 40 mm
aluminium 0,7 mm + steel 0,4 mm
|1,50 m||334 kg||180 kg|
|2,00 m||195 kg||167 kg|
|2,50 m||101 kg||93 kg|
Load distributed evenly, expressed in daN/m2 for a double span and a downward load. Assessments carried out as per the ITC technical report no. 3962/RT/05, applying a 1.5 safety factor to the load corresponding to the strain, equal to 1/200 of the span.
It is a monolithic insulated sheet made in copper, aluminium or prepainted steel with its own particular architectural design in the shape of a Tile.
IsoCoppo Tek is the new strengthened tile shaped sheet: a high density expanded polyurethane core applied during production allows to enhance the product characteristics.
The lateral overlap of the sheet is quick and optimized thanks to the lateral seal.
supports every 350 mm
supports every 700 mm
This is the technological roofing system in the shape of the traditional Roman tile.
Thanks to its research and development, Alubel spa, leader company in the field of metal roofing and cladding, has created Coppo Roma, the new system of tile-shaped sheets that brings together the technology of metal and the tradition of clay tile roofings. Coppo Roma is not only a metal sheet but an integrated system to cover the roof, completed by a range of accessories and special items aimed at satisfying all project requirements.
Fixing on a wooden structure
Fixing on a metal structure
To lay the Coppo Roma sheets correctly it is essential to maintain a 90° angle with the edge of the gutter. If the pitch is not at right angles it is absolutely essential to keep the line parallel to the gutter. Any tolerances of squareness defects have to be kept to the side.